- auf physischen Schnitstelle subinterfaces für vlans anlegen und ips obvi
- Trunk link vom Switch zum Router
- fertig
Settings für die geräte R1
- int g0/0/1
- no shut
- int g0/0/1.10 (subinterface maachen (auto an weil logische schnitstelle))
- encapsulation dot1q 10 (10 == vlan id)
- ip address 192.168.10.1 255.255.255.0
- int g0/0/1.20
- encapsulation dot1q 20
- ip address 192.168.20.1 255.255.255.0
- int g0/0/1.99
- encapsulation dot1q 99 (native)
- ip address 192.168.99.1 255.255.255.0
- S1
- vlan 10
- vlan 20
- vlan 99
- int range f0/1, fa0/5
- switchport mode trunk
- switchport trunk native vlan 99
- switchport trunk allowed vlans 10,20,99
- int fa0/6
- switchport mode access
- switchport acces vlan 10